2.4856
Sales Manager North/East/South
Alloy 625 is a low carbon (0.03%) nickel-chromium-molybdenum-niobium alloy which has excellent corrosion resistance to a wide range of corrosive media. Alloy 625 is normally supplied in annealed condition for wet corrosion applications and is TÜV-approved for pressure vessels in the temperature range from -196°C to 450°C. In annealed condition (grade 1) Alloy625 is characterized by:
- good mechanical property
- Resistance to chlorine-induced stress corrosion cracking
- high resistance to mineral acids such as nitric, phosphoric, sulfuric, and hydrochloric acid
- good resistance to alkalis and organic acids
- exceptional resistance to pitting, crevice, erosion and intergranular corrosion
Material Data Sheet
Material Designation | 2.4856 |
---|---|
Alloy | Alloy 625 |
EN Material Symbol | NiCr22Mo9Nb |
UNS | N 06625 |
VdTÜV Data Sheet | 499 |
Main fields of application of alloy 625
2.4856 is used for:
- Natural gas pipelines
- Production systems and pipe coverings of riser pipes in oil production
- Preparation of phosphoric acid
- Shipbuilding and marine water lines
- Plants for the treatment of radioactive waste
- Flue gas scrubbers and dampers in flue gas cleaning systems
Chemical composition of alloy 625
C | Si | Mn | P | S | Cr | Mo |
---|---|---|---|---|---|---|
0.03 | 0.4 | 0.5 | 0.01 | 0.01 | 21.0-23.0 | 8.0-10.0 |
Mo | Ni | Al | Co | Fe | Ti | Nb+Ta |
---|---|---|---|---|---|---|
8.0-10.0 | rest | 0.4 | 1.0 | 0.4 | 0.4 | 3.2-3.8 |
Characteristics of alloy 625
Property | Value |
---|---|
Temperature Range | Wet corrosion and high-temperature variant possible |
Density | 8.44 g/cm³ |
Melting Range | 1290°C - 1350°C |
ISO-V notch impact toughness (average at room temperature acc. to DIN EN 10045 part 1) | lengthwise ≥ 125 J/cm² |
across ≥ 100 J/cm² |
Annealed Alloy 625 loses notched impact strength at room temperature after having been exposed to temperatures in the range from 538 ° C to 593 ° C.
Filler metal (for welding with alloy 625)
Welding rods and wire electrodes:
Nicrofer S 6020 - FM 625 (2.4831) DIN EN ISO 18274: S Ni 6625 (NiCr22Mo9Nb) UNS N06625 AWS: 5.14: ErNiCrMo3
Covered electrodes:
DIN EN ISO 14172: E Ni 6625 (NiCr22Mo9Nb) (2.4621) UNS W86112 AWS A5.11: ENiCrMo-3
Delivery program
Sheets / Plates mm
0.5 < 76.2
Bars / Billets dia. mm
5.0 - 450
Precision strip mm
0.1 - 0.3
With short delivery time:
plates or sheets, tubes, flanges, forged or die-cut rings and round blanks, elbows, T-fittings, reductions, screws, nuts or washers according to your request. According to your individual wishes, we are able to cut our material with our plasma- or water jet cutter. Our material is stocked in superformats of 2000x6000mm. Cut to size on request.